All for Joomla All for Webmasters

TMI Tensile Tester Model 84-76

TMI Tensile Tester Model 84-76 automatically displays Peak Force and Peak % Elongation after each measurement. Additional results displayed are Tensile Strength, TEA, Tensile Index and Breaking Length.

Compare
Categories: ,

Product Description

Introduction to TMI Tensile Tester Model 84-76

TMI Tensile Tester model 84-76 Tensile Tester has a small footprint just over 0.20 square meters (2.3 square feet). Our model 84-76 provides a large 5.7 inch color display, intuitive operator interface, software control, integrated printer & serial port for data collection.
The new unit is designed to test strength of sheet materials including Paper, Board, Tissue Paper, Film Packaging Seals, Adhesives, Pressure Sensitive Tapes and a variety of low force tensile applications up to 1330 N (136 Kg, 300 lbs).
The TMI Tensile Tester Model 84-76 is a robust, precision, tensile strength instrument suitable for rugged production environments yet designed to provide highly accurate measurements for research applications.

Simple Automated Testing
When used in production, the TMI Tensile Tester Model 84-76 automatically displays Peak Force and Peak % Elongation after each measurement. Additional results displayed are Tensile Strength, TEA, Tensile Index and Breaking Length.

FEATURES of TMI Tensile Tester Model 84-76

• Load Capacity 1330 N (300 Lb)
• Air-Operated Clamps for sample widths of 25, 50 or 75 mm ( 1,2 &3 inch)
• Load Cell selection- 1330, 444 & 111 N (300,100 & 25 lbs) Special ranges available
• Travel stroke 300 mm (12 inches) or 914 mm (36 inches)
• Additional travel stroke sizes available
• Force units – Newtons, Kilograms and Pounds
• Distance units conversion- Millimeters and Inches
• Large high contrast 5.7 inch color display for results and statistics
• Statistics include Average, Minimum, Maximum, COV and SD
• RS232 serial output and built-in printer included
• Compatible with GraphMaster™ PC based data collection and curve analysis software

GraphMaster software for TMI Tensile Tester Model 84-76

TMI Tensile Tester Model 84-76 incorporates a new microcontroller design with a stepper motor which provides precision position control for repeatable instrument performance. An intuitive control panel and large 5.7 inch color display provides easy operation of the testing.

Intuitive Software design of TMI Tensile Tester makes test screen set-up and navigation quick and accurate. Software allows the operator to develop, store and recall commonly used test methods for easy access thus reducing operator error. Test method storage also insures correct settings of critical parameters resulting in repeatable result data. Permanent storage of test results and test curves can be accomplished with optional PC based GraphMaster software.

A common electronic platform incorporates reusable software components which are shared with a family of instruments offered by the TMI Group. Competitively priced instruments are the result as software development costs are reduced and long-term component supply is ensured.

TMI Tensile Tester Control Panel

Intuitive Software design and touch panel allows simple test operation.

Test Settings for tmi tensile tester

Settings screen allows quick entry of critical test parameters and ability to save 10 Test Methods.

TMI Tensile Tester Display screen

Test screen automatically provides result data and statistics after each test.

GraphMaster software for TMI tensile tester

GraphMaster data collection and curve analysis software.

Supported Standards for TMI Tensile Tester 84-76

ISO 12625- 4
Tissue Paper and Tissue Products-Part 4: Determination of tensile strength, stretch at break and tensile energy absorption.

TAPPI T- 494
Tensile properties of paper and paperboard (using constant rate of elongation apparatus).

ISO 1924
Paper and board – Determination of tensile properties – Part 3: Constant rate of elongation method (100 mm/min).

CPPA D34
Tensile Breaking Properties of Paper and Paper Board.

ASTM F88
Standard Test Method for Seal Strength of Flexible Barrier Materials.

Additional Information

Brand

TMI

Model

84-76

Max Force

1330 N (300 lb)

Load cells supported

1330, 444 & 111 N ( 300,100 & 25 lbs) special ranges available

Total Extension Limit / Stroke Length

300 mm (12 inches), or 914 mm (36 inches)

Travel Speed / Test Speed

5-300 mm/ minute (.2-12 inch/min)

Return Speed

5-300 mm/ minute (.2-12 inch/min)

Load Cell Accuracy

± .5% of reading

Load / Force Units

Newtons, Kilograms and Pounds

Analysis Software

TMI GraphMaster

Additional Options in Machine

Distance units conversion: Millimeters and Inches

Statistics Display
•Number of tests
•Highest value
•Lowest value
•Average
•Standard deviation
•Variation coefficient
•Max. number of tests : 100 (in one test series)

Dimensions

(H x L x W) 79 cm x 40 cm x 53 cm (31 in x 16 in x 11 in)

Machine weight

43 kg (95 lbs)

Safety features

Overload protection electronically at 100% of measuring rage during test
Overload protection during travel

Eletricals (Supply voltage)

120V/220Volt 50Hz/60Hz

Optional Accessories

Air-Operated Paper Clamps
Air-Operated Tissue Paper Clamps
Load cells- 1330, 444 & 111 N
Load cells 300, 100, 25 lbs
special load cell ranges available

Reviews

There are no reviews yet.

Be the first to review “TMI Tensile Tester Model 84-76”

Your email address will not be published. Required fields are marked *

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.

Pin It on Pinterest

Share This
X