All for Joomla All for Webmasters

TMI Motorized Notching Cutter – Model 22-05-03

TMI Motorized Notching Cutter, Model 22-05-03 produces a notch in a test specimen for ASTM D 256 and ISO 180 according to the IZOD Standard. Charpy notches can also be made according to ASTM D 6110 and ISO 179.

Compare
Categories: ,

Product Description

TMI Motorized Notch cutter is used in conjunction with the Model 43-76 Pendulum Impact tester, the TMI Motorized Notching Cutter, Model 22-05-03 produces a notch in a test specimen for ASTM D 256 and ISO 180 according to the IZOD Standard. Charpy notches can also be made according to ASTM D 6110 and ISO 179.
It is noted in ASTM standards that it is extremely critical to produce an accurate cut and to measure the depth and contour of the notch before testing. Result data will be compromised due to poor sample preparation.
Model 22-05-03 Motorized Notch Cutter automates the specimen notching procedure to produce a repeatable and accurate cut every time. An easy to use thickness gauge is included to verify the depth cut before testing.

NOTCH SPECIFICATIONS:

IZOD IMPACT

ASTM D256
Notch Dimensions:
Radius: 0.25 ±0.05 mm 45°
Width remaining under notch: 10.16 ±0.05 mm

IZOD IMPACT

ISO 180
Notch Dimensions:
Radius: 0.25 ±0.05 mm 45°
Width remaining under notch: 8 ±0.2 mm

IZOD Testing

A test specimen is clamped perpendicular into the impact test fixture with the notched side facing the striking edge of the pendulum. The pendulum strikes through the specimen.

CHARPY IMPACT

ASTM D 6110
Notch Dimensions:
Radius: 0.25 ±0.05 mm
Width remaining under notch: 10.16 ±0.05 mm

CHARPY Testing

The specimen is mounted horizontally and supported unclamped at both ends. The pendulum is released and allowed to strike through the specimen.

Additional Information

Brand

TMI

Model

22-05-03

IZOD IMPACT (ASTM D256)

ASTM D256
Notch Dimensions:
Radius: 0.25 ±0.05 mm 45°
Width remaining under notch: 10.16 ±0.05 mm

IZOD IMPACT (ISO 180)

ISO 180
Notch Dimensions:
Radius: 0.25 ±0.05 mm 45°
Width remaining under notch: 8 ±0.2 mm

IZOD TESTING

A test specimen is clamped perpendicular into the impact test fixture with the notched side facing the striking edge of the pendulum. The pendulum strikes through the specimen.

CHARPY IMPACT

ASTM D 6110
Notch Dimensions:
Radius: 0.25 ±0.05 mm
Width remaining under notch: 10.16 ±0.05 mm

CHARPY TESTING

The specimen is mounted horizontally and supported unclamped at both ends. The pendulum is released and allowed to strike through the specimen.

Reviews

There are no reviews yet.

Be the first to review “TMI Motorized Notching Cutter – Model 22-05-03”

Your email address will not be published. Required fields are marked *

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.

Pin It on Pinterest

Share This
X